* Preparation for initial Flatpack and FlatHub integration
This integrate some initial changes required for Flatpack and distribution from FlatHub.
Also added some resources that will be used for packaging on Linux.
* Address gdkchan comment
* Implement/Stub mnpp:app service and some hid calls
This PR Implement/Stub the `mnpp:app` service (closes#3107) accordingly to RE, which seems to do some telemetry for China region only, so everything is stubbed.
This PR fixes some inconsistencies in the hid service too and stub EnableSixAxisSensorUnalteredPassthrough, IsSixAxisSensorUnalteredPassthroughEnabled, LoadSixAxisSensorCalibrationParameter, GetSixAxisSensorIcInformation calls (closes#3123 and closes#3124).
* Addresses Thog review
* added trace log level
* use trace log level instead of debug ( #1547)
* alignment #1547
* moved trace logs toggle at the bottom #1547
* bumped config file version #3096
* added migration step #3096
* setting moved to the dev section #1547
* performance warning displayed when trace is enabled #1547
As AppVeyor took our project down and deleted it without any comments, we are switching to GitHub Releases earlier than anticipated.
This isn't the most elegant design (and I would have prefered having a release manifest in place) but this will do for now.
The concept of release channel was also defined with this change.
The new base version is now 1.1.x to avoid confusion with older system.
Standard test CI was disabled temporarly and may be chained later as a CI job after the release job.
Users are expected to redownload the emulator to be sure to be up to date.
PS: If someone from AppVeyor read this, thanks again for ruining my week-end, I will be sure to NEVER recommend you to anyone.
Best Regards, Mary.
* Add the ability to toggle mute in the status bar.
* Add the ability to toggle mute in the status bar.
* Formatting fixes
* Add hotkey (F2) to mute
* Add default hotkey to config.json
* Add ability to change volume via slider.
* Fix Headless
* Fix SDL2 Problem : Credits to d3xMachina
* Remove unnecessary work
* Address gdk comments
* Toggling with Hotkey now properly restores volume to original level.
* Toggling with Hotkey now properly restores volume to original level.
* Update UI to show Volume % instead of Muted/Unmuted
* Clean up the volume ui a bit.
* Undo unintentionally committed code.
* Implement AudRen Support
* Restore intiial volume level in function definition.
* Finalize UI
* Finalize UI
* Use clamp for bounds check
* Use Math.Clamp for volume in soundio
* Address comments by gdkchan
* Address remaining comments
* Fix missing semicolon
* Address remaining gdkchan comment
* Fix comment
* Change /* to //
* Allow volume slider to change volume immediately.
Also force label text to cast to int to prevent decimals from showing in status bar
* Remove blank line
* Undo setting of volume level when "Cancel" is pressed.
* Fix allignment for settings window code
* infra: Migrate to .NET 6
* Rollback version naming change
* Workaround .NET 6 ZipArchive API issues
* ci: Switch to VS 2022 for AppVeyor
CI is now ready for .NET 6
* Suppress WebClient warning in DoUpdateWithMultipleThreads
* Attempt to workaround System.Drawing.Common changes on 6.0.0
* Change keyboard rendering from System.Drawing to ImageSharp
* Make the software keyboard renderer multithreaded
* Bump ImageSharp version to 1.0.4 to fix a bug in Image.Load
* Add fallback fonts to the keyboard renderer
* Fix warnings
* Address caian's comment
* Clean up linux workaround as it's uneeded now
* Update readme
Co-authored-by: Caian Benedicto <caianbene@gmail.com>
* Remove a bit of unsafety around
* Regenerate StructArrayHelpers with a max element value of 256
* hle: remove unsafe marker from all struct that had it
* hle: make SoftwareKeyboardRenderer.TryCopyTo safe
* hle: remove unsafety in NpadDevice and remove AllowUnsafeBlocks from csproj
* Revert "Regenerate StructArrayHelpers with a max element value of 256"
This reverts commit f32a6e5be094f50571970eb1116b65c080781d05.
* Introduce ByteArray of various size and use that instead of ArrayXXX to avoid stackoverflow in .NET runtime type resolution
* Use ByteArray more
* Add some missing spaces on Pack = 1 for various structs
* Fix broken logic for TryCopyTo
* Address gdkchan's comment
* Address gdkchan's comment
This PR stubs and implements some clkrst call because they are used to overclock the Switch hardware and it's pointless in our case as we emulate the system.
Everything was done checked by RE.
Fixes#2686
* hos: Cleanup the project
Since a lot of changes has been done on the HOS project, there are some leftover here and there, or class just used in one service, things at wrong places, and more.
This PR fixes that, additionnally to that, I've realigned some vars because I though it make the code more readable.
* Address gdkchan feedback
* addresses Thog feedback
* Revert ElfSymbol
* Add a "Pause Emulation" option and hotkey
Closes Ryujinx#1604
* Refactoring how pause is handled
* Applied suggested changes from review
* Applied suggested fixes
* Pass correct suspend type to threads for suspend/resume
* Fix NRE after stoping emulation
* Removing SimulateWakeUpMessage call after resuming emulation
* Skip suspending non game process
* Pause the tickCounter in the ExecutionContext
* Refactoring tickCounter pause/resume as suggested
* Fix Config migration to add pause hotkey
* Fixed pausing only application threads
* Fix exiting emulator while paused
* Avoid pause/resume while already paused/resumed
* Cleanup unused code
* Avoid restarting audio if stopping emulation while in pause.
* Added suggested changes
* Fix ConfigurationState
* Initial Implementation
About as fast as nvidia GL multithreading, can be improved with faster command queuing.
* Struct based command list
Speeds up a bit. Still a lot of time lost to resource copy.
* Do shader init while the render thread is active.
* Introduce circular span pool V1
Ideally should be able to use structs instead of references for storing these spans on commands. Will try that next.
* Refactor SpanRef some more
Use a struct to represent SpanRef, rather than a reference.
* Flush buffers on background thread
* Use a span for UpdateRenderScale.
Much faster than copying the array.
* Calculate command size using reflection
* WIP parallel shaders
* Some minor optimisation
* Only 2 max refs per command now.
The command with 3 refs is gone. 😌
* Don't cast on the GPU side
* Remove redundant casts, force sync on window present
* Fix Shader Cache
* Fix host shader save.
* Fixup to work with new renderer stuff
* Make command Run static, use array of delegates as lookup
Profile says this takes less time than the previous way.
* Bring up to date
* Add settings toggle. Fix Muiltithreading Off mode.
* Fix warning.
* Release tracking lock for flushes
* Fix Conditional Render fast path with threaded gal
* Make handle iteration safe when releasing the lock
This is mostly temporary.
* Attempt to set backend threading on driver
Only really works on nvidia before launching a game.
* Fix race condition with BufferModifiedRangeList, exceptions in tracking actions
* Update buffer set commands
* Some cleanup
* Only use stutter workaround when using opengl renderer non-threaded
* Add host-conditional reservation of counter events
There has always been the possibility that conditional rendering could use a query object just as it is disposed by the counter queue. This change makes it so that when the host decides to use host conditional rendering, the query object is reserved so that it cannot be deleted. Counter events can optionally start reserved, as the threaded implementation can reserve them before the backend creates them, and there would otherwise be a short amount of time where the counter queue could dispose the event before a call to reserve it could be made.
* Address Feedback
* Make counter flush tracked again.
Hopefully does not cause any issues this time.
* Wait for FlushTo on the main queue thread.
Currently assumes only one thread will want to FlushTo (in this case, the GPU thread)
* Add SDL2 headless integration
* Add HLE macro commands.
Co-authored-by: Mary <mary@mary.zone>
* Add support for HLE macros and accelerate MultiDrawElementsIndirectCount
* Add missing barrier
* Fix index buffer count
* Add support check for each macro hle before use
* Add missing xml doc
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* First working vibration implementation
* Fix Infinite Rumble in SDL2Mouse
* Stop ignoring one vibValues every 2
* Remove RumbleInfinity as suggested
* Reworked all the vibration handle / calculation
* Revert HidVibrationDevicePosition changes
* Add UI to enable and tune rumble
* Remove some stub logs
* Add PlayerIndex in rumble debug log
* Fix all requested changes
* Implements hid::GetVibrationDeviceInfo
* Better implements HidVibrationValue.Equals/GetHashCode
* Added requested changes from code review
* Last fixes from review
* Update configuration file version for rebase
* Use DeviceState for compute and i2m
* Migrate 2D class, more comments
* Migrate DMA copy engine
* Remove now unused code
* Replace GpuState by GpuAccessorState on GpuAcessor, since compute no longer has a GpuState
* More comments
* Add logging (disabled)
* Add back i2m on 3D engine
* no name: Mii Editor applet support
* addresses gdkchan feedback
* Fix comment
* Bypass MountCounter of MiiDatabaseManager
* Fix GetSettingsPlatformRegion
* Disable Applet Menu for unsupported firmwares
* nfc/nfp: Implement ISystemManager and ISystem
This PR add permission levels for `nfc` and `nfp` services:
- `nfc`: `CreateUserInterface` and `CreateSystemInterface` are implemented.
- `INfc`: `Initialize` and `IsNfcEnabled` calls are stubbed.
- `nfp`: `CreateDebugInterface` and `CreateSystemInterface` are implemented.
- `INfp`: `GetRegisterInfo2` for `IDebug` and `ISystem` are implemented.
* Addresses gdkchan feedback
* Refactoring of KMemoryManager class
* Replace some trivial uses of DRAM address with VA
* Get rid of GetDramAddressFromVa
* Abstracting more operations on derived page table class
* Run auto-format on KPageTableBase
* Managed to make TryConvertVaToPa private, few uses remains now
* Implement guest physical pages ref counting, remove manual freeing
* Make DoMmuOperation private and call new abstract methods only from the base class
* Pass pages count rather than size on Map/UnmapMemory
* Change memory managers to take host pointers
* Fix a guest memory leak and simplify KPageTable
* Expose new methods for host range query and mapping
* Some refactoring of MapPagesFromClientProcess to allow proper page ref counting and mapping without KPageLists
* Remove more uses of AddVaRangeToPageList, now only one remains (shared memory page checking)
* Add a SharedMemoryStorage class, will be useful for host mapping
* Sayonara AddVaRangeToPageList, you served us well
* Start to implement host memory mapping (WIP)
* Support memory tracking through host exception handling
* Fix some access violations from HLE service guest memory access and CPU
* Fix memory tracking
* Fix mapping list bugs, including a race and a error adding mapping ranges
* Simple page table for memory tracking
* Simple "volatile" region handle mode
* Update UBOs directly (experimental, rough)
* Fix the overlap check
* Only set non-modified buffers as volatile
* Fix some memory tracking issues
* Fix possible race in MapBufferFromClientProcess (block list updates were not locked)
* Write uniform update to memory immediately, only defer the buffer set.
* Fix some memory tracking issues
* Pass correct pages count on shared memory unmap
* Armeilleure Signal Handler v1 + Unix changes
Unix currently behaves like windows, rather than remapping physical
* Actually check if the host platform is unix
* Fix decommit on linux.
* Implement windows 10 placeholder shared memory, fix a buffer issue.
* Make PTC version something that will never match with master
* Remove testing variable for block count
* Add reference count for memory manager, fix dispose
Can still deadlock with OpenAL
* Add address validation, use page table for mapped check, add docs
Might clean up the page table traversing routines.
* Implement batched mapping/tracking.
* Move documentation, fix tests.
* Cleanup uniform buffer update stuff.
* Remove unnecessary assignment.
* Add unsafe host mapped memory switch
On by default. Would be good to turn this off for untrusted code (homebrew, exefs mods) and give the user the option to turn it on manually, though that requires some UI work.
* Remove C# exception handlers
They have issues due to current .NET limitations, so the meilleure one fully replaces them for now.
* Fix MapPhysicalMemory on the software MemoryManager.
* Null check for GetHostAddress, docs
* Add configuration for setting memory manager mode (not in UI yet)
* Add config to UI
* Fix type mismatch on Unix signal handler code emit
* Fix 6GB DRAM mode.
The size can be greater than `uint.MaxValue` when the DRAM is >4GB.
* Address some feedback.
* More detailed error if backing memory cannot be mapped.
* SetLastError on all OS functions for consistency
* Force pages dirty with UBO update instead of setting them directly.
Seems to be much faster across a few games. Need retesting.
* Rebase, configuration rework, fix mem tracking regression
* Fix race in FreePages
* Set memory managers null after decrementing ref count
* Remove readonly keyword, as this is now modified.
* Use a local variable for the signal handler rather than a register.
* Fix bug with buffer resize, and index/uniform buffer binding.
Should fix flickering in games.
* Add InvalidAccessHandler to MemoryTracking
Doesn't do anything yet
* Call invalid access handler on unmapped read/write.
Same rules as the regular memory manager.
* Make unsafe mapped memory its own MemoryManagerType
* Move FlushUboDirty into UpdateState.
* Buffer dirty cache, rather than ubo cache
Much cleaner, may be reusable for Inline2Memory updates.
* This doesn't return anything anymore.
* Add sigaction remove methods, correct a few function signatures.
* Return empty list of physical regions for size 0.
* Also on AddressSpaceManager
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* audio: Implement a SDL2 backend
This adds support to SDL2 as an audio backend.
It has the same compatibility level as OpenAL without its issues.
I also took the liberty of restructuring the SDL2 code to have one
shared project between audio and input.
The configuration version was also incremented.
* Address gdkchan's comments
* Fix update logic
* Add an heuristic to pick the correct target sample count wanted by the game
* Address gdkchan's comments
* Address Ac_k's comments
* Fix audren output
* Address gdkchan's comments
* openal: Update to OpenTK 4
* Ryujinx.Graphics.OpenGL: Update to OpenTK 4
* Entirely removed OpenTK 3, still wip
* Use SPB for context creation and handling
Still need to test on GLX and readd input support
* Start implementing a new input system
So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal
Button mapping backend is implemented
TODO: front end, configuration handling and configuration migration
TODO: keyboard support
* Enforce RGB only framebuffer on the GLWidget
Fix possible transparent window
* Implement UI gamepad frontend
Also fix bad mapping of minus button and ensure gamepad config is updated in real time
* Handle controller being disconnected and reconnected again
* Revert "Enforce RGB only framebuffer on the GLWidget"
This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965.
* Fix first color clear
* Filter SDL2 events a bit
* Start working on the keyboard detail
- Rework configuration classes a bit to be more clean.
- Integrate fully the keyboard configuration to the front end (TODO: assigner)
- Start skeleton for the GTK3 keyboard driver
* Add KeyboardStateSnapshot and its integration
* Implement keyboard assigner and GTK3 key mapping
TODO: controller configuration mapping and IGamepad implementation for keyboard
* Add missing SR and SL definitions
* Fix copy pasta mistake on config for previous commit
* Implement IGamepad interface for GTK3 keyboard
* Fix some implementation still being commented in the controller ui for keyboard
* Port screen handle code
* Remove all configuration management code and move HidNew to Hid
* Rename InputConfigNew to InputConfig
* Add a version field to the input config
* Prepare serialization and deserialization of new input config and migrate profile loading and saving
* Support input configuration saving to config and bump config version to 23.
* Clean up in ConfigurationState
* Reference SPB via a nuget package
* Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2
* move GTK3 input to the right directory
* Fix triggers on SDL2
* Update to SDL2 2.0.14 via our own fork
* Update buttons definition for SDL2 2.0.14 and report gamepad features
* Implement motion support again with SDL2
TODO: cemu hooks integration
* Switch to latest of nightly SDL2
* SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index
* Ensure values are set in UI when the gamepad get hot plugged
* Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids
This fixes permanent rumble of pro controller in some hotplug scenario
* Fix more UI bugs
* Move legcay motion code around before reintegration
* gamecontroller UI tweaks here and there
* Hide Motion on non motion configurations
* Update the TODO grave
Some TODO were fixed long time ago or are quite oudated...
* Integrate cemu hooks motion configuration
* Integrate cemu hooks configuration options to the UI again
* cemuhooks => cemuhooks
* Add cemu hook support again
* Fix regression on normal motion and fix some very nasty bugs around
* Fix for XCB multithreads issue on Linux
* Enable motion by default
* Block inputs in the main view when in the controller configuration window
* Some fixes for the controller ui again
* Add joycon support and fixes other hints
* Bug fixes and clean up
- Invert default mapping if not a Nintendo controller
- Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment)
- Clean up hints in use
- Remove debug logs around
- Fixes potential double free with SDL2Gamepad
* Move the button assigner and motion logic to the Ryujinx.Input project
* Reimplement raw keyboard hle input
Also move out the logic of the hotkeys
* Move all remaining Input manager stuffs to the Ryujinx.Input project
* Increment configuration version yet again because of master changes
* Ensure input config isn't null when not present
* Fixes for VS not being nice
* Fix broken gamepad caching logic causing crashes on ui
* Ensure the background context is destroyed
* Update dependencies
* Readd retrocompat with old format of the config to avoid parsing and crashes on those versions
Also updated the debug Config.json
* Document new input APIs
* Isolate SDL2Driver to the project and remove external export of it
* Add support for external gamepad db mappings on SDL2
* Last clean up before PR
* Addresses first part of comments
* Address gdkchan's comments
* Do not use JsonException
* Last comment fixes
* Restore removed text
* Adds more items to logs:
- Remove #1942
* Further removal of changes from #1942
* Removes hardcoded config state variables for logging
- Adds Configuration logging
* Decoupled logging from ReactiveObject
- Event handler added to Configuration state to handle logging of value changes
* Decoupled logging from ReactiveObject
- Event handler added to Configuration state to handle logging of value changes
* Add initial implementation of the Tamper Machine
* Implement Atmosphere opcodes 0, 4 and 9
* Add missing TamperCompilationException class
* Implement Atmosphere conditional and loop opcodes 1, 2 and 3
* Inplement input conditional opcode 8
* Add register store opcode A
* Implement extended pause/resume opcodes FF0 and FF1
* Implement extended log opcode FFF
* Implement extended register conditional opcode C0
* Refactor TamperProgram to an interface
* Moved Atmosphere classes to a separate subdirectory
* Fix OpProcCtrl class not setting process
* Implement extended register save/restore opcodes C1, C2 and C3
* Refactor code emitters to separate classes
* Supress memory access errors from the Tamper Machine
* Add debug information to tamper register and memory writes
* Add block stack check to Atmosphere Cheat compiler
* Add handheld input support to Tamper Machine
* Fix code styling
* Fix build id and cheat case mismatch
* Fix invalid immediate size selection
* Print build ids of the title
* Prevent Tamper Machine from change code regions
* Remove Atmosphere namespace
* Remove empty cheats from the list
* Prevent code modification without disabling the tampering
* Fix missing addressing mode in LoadRegisterWithMemory
* Fix wrong addressing in RegisterConditional
* Add name to the tamper machine thread
* Fix code styling
* Implement friendlier portable mode
* Remove first run dialog
* Disable updates in portable mode for now
* Convert relative custom paths to absolute ones
Also, fix a regression when custom path doesn't exist
* Revise SystemInfo
Cleans up and adds a bit more info (logical core count and available mem at launch) to logs.
- Extract CPU name from CPUID when supported.
- Linux: Robust parsing of procfs files
- Windows: Prefer native calls to WMI
- Remove unnecessary virtual specifiers
* Address gdkchan's comments
* Address AcK's comments
* Address formatting nits
* Make Windows DPI aware to display properly on high-resolution screens.
* remove empty line
* Don't use app manifest, set process dpi aware programatically.
Store variables in Program.cs for use instead of re-creating them per class/ method.
* Fix for linux/osx
* Add braces
* Re-use manifest. It appears to be required on linux.
* Undo previous commit -- it appears linux was simply never affected.
* Addressed AcK's comments
* Remove unused usings
* Address comments by AcK #2
* Re-order
* Move FromHwnd call to ForceDpiAware class. Wrap in Try-Catch to prevent crashes on systems that don't support it.
* Additional code cleanup
* Remove "global::" reference.
* Implement "Hide Cursor On Idle" option
Adds a general option to autohide the cursor after 8s have elapsed.
* Fix cursor not hiding on Windows and dispose it
* Don't dispose cursor, fix var names
* Abide by the GNOME documentation
* Fix nits
* Disabled by default, make it so it doesn't utilize any timer
* Remove *NIX time and extra lines
* Don't calculate if option is disabled
* Move if case
* Fix alignment
- Bind toggle events after setting up their current values. This fixes the issue where the config is saved 10 times when the main window is opened 😬
- Write to disk immediately to decrease the chances of corruption
